Dive Training

EQUIPMENT

Deep Sea Marine Services, along with our partners, Atlantic Diving Equipment, specialize in providing custom confined-water surface-supplied breathing gas manifolds, emergency gas switch blocks, hookah packages, and harnesses.

Harnesses

Surface-Supplied Emergency Gas Switch Block

This robust switch block, built by Atlantic Dive Equipment, is designed to mount directly to the 2" webbing of any harness. The large control knob is easy to locate and use, even with cold water gloves on.

Designed to mount on 2" harness webbing
4-port configuration
- 3 ports have open communication
- valve controls BAILOUT port which is clearly marked
- Ports are 3/8"-24 UNF
- Bailout port is configured to accept a 9/16"-18 UNF regulator hose
One-way surface supply inlet connector
JIC-4 inlet fitting installed and JIC-6 included
Large on/0ff knob is dry-glove friendly
Easy-to-service with service kits available.

Confined Water Surface-Supplied Manifold

This manifold, built by Atlantic Dive Equipment, is designed to safety transfer gas from topside cylinders to divers below. The various components are positioned in an optimal layout and mounted to an aluminum back panel to allow for easy transport. It can also be mounted to a hand cart for easy mobility along with two supply cylinders. It has a maximum supply pressure of 3500 psi.

Dual independent air supply
Cylinder connectors are DIN / yoke convertible
3500 psi working pressure
Line valves have one-way valves built in
Venting regulator allows you to dial the desired intermediate pressure
HP supply gauge is 0 - 5000 psi (0 - 350 bar)
IP gauge is 0 - 300 psi (0 - 20 bar)
Four brass quick-connects with locking collars
Safety relief valve
Mounted to anodized aluminum back board 23.6 x 17.75" (60 x 40 cm)
Hand cart mountable
- Includes mounting hardware: 4ea. hex head cap screws, flat washers, lock washers and wing nuts

Umbilical Leasing and Sales

As per OSHA CFR 1910.430.C, air hoses in your umbilicals must be pressure tested annually to ensure their integrity. This is a time consuming and costly process which requires either shipping your umbilicals to a testing facility with weeks of down time and hundreds of dollars, or testing them in-house and maintaining annual certified/calibrated gauges and a safe testing area. Both methods can be equally frustrating. But with Deep Sea Marine Services you no longer have to endure these dilemmas! The Deep Sea Marine Services Umbilical Leasing Program supplies your company with certified umbilicals complete with fittings, connections and lengths of your choosing annually with no down time to your operations. When your certified umbilicals arrive simply place your expiring umbilicals in the shipping container your news ones arrived in and ship them back with the pre-paid shipping label. Looking to start a surface-supplied dive operation or add to your existing one? Deep Sea Marine Services Umbilical Leasing Program requires no purchase of umbilicals, saving you thousands of dollars.

Umbilicals are before yours expire, no downtime to your operations
No umbilical purchase necessary
Shipping costs included in leasing price
Certification documentation shipped with your umbilicals
Minimum lease term required
One-time administration fee upon execution of the lease agreement
Discounts available for leases of four umbilicals or more.
Lease rates as low as $699 annually
Umbilicals also available for purchase